Kimber’s compact R7 Mako has built a following among concealed carriers, but the company has now flagged a critical safety problem in a specific batch of pistols. If you own one of these handguns, you are being asked to stop using it, verify the serial number, and follow Kimber’s instructions for inspection and repair before you carry it again.
The issue centers on the firing pin safety block, a component that is supposed to prevent an unintended discharge. Kimber has acknowledged a quality defect in certain R7 models and is treating it as a formal recall, with a defined list of affected serial numbers and a structured process to get your pistol checked and, if needed, fixed at no cost to you.
What Kimber found in the R7 Mako firing pin safety block
The core of Kimber’s notice is straightforward: the company discovered a defect in the firing pin safety block of some R7 pistols that could allow more than one round to fire from a single trigger pull. In a defensive handgun that you rely on for precise, controlled shots, any condition that might produce an unintended second discharge is a serious safety failure, both for you and for anyone nearby. Kimber describes this as a quality issue affecting the firing pin safety block in certain Kimber R7 model handguns, and it is the reason the company has launched a targeted R7 Mako Handgun Firing Pin Safety Block Recall.
To manage that risk, Kimber has created a dedicated safety page that centralizes recall information for its products, including the R7. You are directed to consult the company’s broader safety resources to understand how the firing pin safety block is supposed to function and why a malfunction in that part cannot be ignored. The recall documentation explains that the defect is limited to specific serial numbers, which means your first responsibility as an owner is to determine whether your pistol is on that list before you carry or fire it again.
Which R7 Mako pistols are affected and how to check yours
Kimber has not recalled every R7, only a defined subset that shares the problematic firing pin safety block. The company has published a List of Serial Numbers of Recalled Products that identifies the specific R7 handguns affected by the firing pin safety block issue. Kimber Mfg, Inc states that only those serial numbers are subject to the recall, and that the defect can result in more than one round being fired from a single trigger pull. If your pistol’s serial number does not appear on that list, it is not part of this particular campaign based on the information Kimber has provided.
To make the process easier, Kimber has also tied the recall to a dedicated R7 lookup page. If your R7 handgun has a serial number that is listed, you are instructed to contact the company immediately so it can determine whether a repair or replacement is necessary, free of charge. The Handgun Firing Pin Safety Recall page explains that you should not continue to use the pistol until Kimber has evaluated it. That same structure is reflected in a parallel Mako Handgun Firing Pin Safety Block Recall listing, which again emphasizes that only the serial numbers shown are covered and that owners who purchased and/or used them must follow the recall steps.
Immediate steps Kimber wants R7 Mako owners to take
Kimber’s guidance to you as an R7 owner is unambiguous: stop using the pistol if it falls within the affected range and begin the recall process. Reporting on the recall notes that Owners of R7 Mako pistols are told to discontinue their use immediately and visit the company’s safety webpage to determine whether their handgun is subject to the recall. That instruction is consistent with Kimber’s own recall language, which frames the firing pin safety block defect as a condition that must be corrected before the pistol is returned to service for concealed carry or range use.
Once you confirm that your serial number is included, Kimber lays out a structured process for returning the handgun. The recall documentation describes a multi-step procedure that begins with a clear directive: Step 1 – Please either contact Kimber directly or use the online tools provided to register your pistol for the recall. The company has also set up a dedicated phone line, instructing you to call 888-243-4522 during normal business hours. On the R7 serial number page, Kimber specifies that if your R7 handgun has a serial number that is listed, you should contact the company immediately at 888-243-4522, Monday through Friday, so Kimber can determine whether a repair or replacement will be necessary, free of charge.
How Kimber is handling shipping, repairs, and communication
For many gun owners, the practical question is what happens after you initiate the recall. Kimber has indicated that it will cover the logistics of getting affected pistols back to the factory and returned to you. Reporting on the recall notes that You may also email the company at a dedicated address for the R7 firing pin safety block recall, and that Kimber will pay shipping costs to and from its facility for the affected handguns. That commitment is important if you rely on the pistol for daily carry, because it means you are not being asked to shoulder the financial burden of correcting a factory defect.
Kimber’s own recall pages reinforce that message, explaining that once you have contacted the company and confirmed your serial number, it will arrange for the pistol to be returned, inspected, and, if necessary, repaired or replaced at no cost. Coverage of the recall notes that Kimber will make every effort to complete the work quickly so that your handgun can be returned to service, a point echoed in analysis of how Kimber is managing the R7 Mako Handguns Recalled campaign. That same reporting underscores that only Some Mako Handguns Recalled are affected, which again highlights why checking your specific serial number is the first and most important step.
Why this recall matters for your everyday carry decisions
Even if your R7 is not on the recall list, the firing pin safety block issue is a reminder that mechanical reliability is not optional in a defensive firearm. Coverage of the recall explains that Kimber Manufacturing identified the problem earlier in the product’s life cycle, with a Mako Safety Recall Issued by Kimber Manufacturing after the defect was discovered. Other reporting notes that in Feb, Kimber discovered a problem with the firing pin safety block and moved to notify customers and arrange for its return to Kimber. That timeline underscores that the company is treating the defect as a live safety concern, not a minor annoyance.
For you as a carrier, the takeaway is that a recall is not a theoretical exercise. If your pistol is on the list, you are being asked to remove it from your holster rotation, verify the serial number against the official recall listings, and follow the contact instructions on Kimber’s safety and serial number pages. The recall documentation and independent coverage both stress that the defect can cause more than one round to fire from a single trigger pull, which is incompatible with safe, responsible concealed carry. Whether you carry the R7 daily or keep it in a nightstand, treating the recall as a priority is part of the same mindset that leads you to train regularly, maintain your equipment, and stay current on manufacturer advisories for your firearms.
Like The Avid Outdoorsman’s content? Be sure to follow us.
Here’s more from us:
